Go to the Tools pull-down menu and select
Accounts.
Create a new account.
Click Next.
Select "POP3".
Click Next.
Enter the following information:
Your Name - Enter the
name that people will see when they receive email from
you.
E-mail Address - Enter
your email address.
Incoming mail server (POP3)
- Enter your incoming mail server: mail.yoursitedomain.com.
Outgoing mail (SMTP)
server - Enter your outgoing mail (SMTP) server
address provided by your Internet Service Provider (ISP)
ie. if your internet connection is with Optus:
mail.optusnet.com.au or with Telstra: mail.bigpond.com.au*
*Please note that these addresses are only a guide, please
contact your ISP helpdesk to confirm the exact outgoing
mail server address to use.
Account name - Enter
the username you entered when you created the email
account in your Plesk Control Panel.
Password - Enter the
password for the account.
Make sure the "Log on using Secure Password
Authentication (SPA)" option is NOT selected.
(Smaller than actual size)
You do not need to modify the default settings for the
More Settings section.
Go to the Tools pull-down menu and select
Accounts.
Create a new account.
Click on the Mail tab.
Click Add.
In the Display name field, enter the name
that people will see when they receive email from you.
Then click Next.
Enter the following information.
My incoming mail server is a
- Select POP3.
Incoming mail (POP3 or IMAP)
server - Enter your incoming mail server: mail.yoursitedomain.com.
Outgoing mail (SMTP) server
- Enter your outgoing mail (SMTP) server address provided
by your Internet Service Provider (ISP) ie.
if your internet connection is with Optus:
mail.optusnet.com.au or with Telstra: mail.bigpond.com.au*
*Please note that these addresses are only a guide, please
contact your ISP helpdesk to confirm the exact outgoing
mail server address to use.
Click Next.
Enter the following information.
Account name - Enter
the username you entered when you created the email
account in your Plesk Control Panel.
Password - Enter the
password for the account.
Make sure the "Log on using Secure Password
Authentication (SPA)" option is NOT selected.
Check the Remember password checkbox and
click Next.
Select the kind of Internet connection that your
computer uses. It's often convenient to select Connect
using my local area network (LAN), even if you use a
modem to connect to the Internet.
Go to the Tools pull-down menu and select
Accounts.
Click on the Mail tab.
Click Add.
In the Display name field, enter the name
that people will see when they receive email from you.
Then click Next.
In the E-mail address field, enter your email
address and click Next.
Enter the following information.
My incoming mail server is a
- Select POP3.
Incoming mail (POP3 or IMAP)
server - Enter your incoming mail server: mail.yoursitedomain.com.
Outgoing mail (SMTP) server
- Enter your outgoing mail (SMTP) server address provided
by your Internet Service Provider (ISP) ie.
if your internet connection is with Optus:
mail.optusnet.com.au or with Telstra: mail.bigpond.com.au*
*Please note that these addresses are only a guide, please
contact your ISP helpdesk to confirm the exact outgoing
mail server address to use.
Click Next.
Enter the following information.
POP account name -
Enter the username you entered when you created the email
account in your
Plesk Control Panel.
Password - Enter the
password for the account.
Make sure the "Log on using Secure Password
Authentication (SPA)" option is NOT selected.
Click Next.
In the Internet mail account name field,
enter a description for the account.
Click Next.
Select the kind of Internet connection that your
computer uses. It's often convenient to select Connect
using my local area network (LAN), even if you use a
modem to connect to the Internet.
